The Davenport Soft Peanut Brittle Recipe - Krista Gilbert (2024)

FAQs

How do you harden soft peanut brittle? ›

I have experimented heating the candy between 285-300 degrees. I like heating to 300 if it is immediately taken off the heat and cooled. It hardens quickly if you go over 300 even a little bit. Most people have had success with the brittle at any temp in between 285-300, but like I said, I prefer closer to 300 degrees.

If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F. Why is my peanut brittle light colored? That's because you did not heat the mixture up enough, and the sugars did not fully caramelize. This is what gives peanut brittle the beautiful golden brown color.

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Storage. Properly stored (in an airtight container at room temperature), peanut brittle will last one month. Do not store the brittle in the refrigerator because the moisture in the fridge will soften the brittle.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky. A thermometer is an accessible and inexpensive way to monitor temperature and ensure properly cooked brittle. Make sure your baking soda is fresh and active.

If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready. Mine took 18 minutes to reach the correct temperature, so around 15 minutes start trying the water test.

As mentioned in “how to make peanut brittle”, it's very important to move fast after the peanuts and baking soda are mixed in. If not, the peanut brittle will turn out too thick and clumpy. Don't play the guessing game and use a candy thermometer instead. This will ensure your peanut brittle turns out perfectly golden.

To store: Once it's completely cooled, store peanut brittle in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To Freeze: Peanut brittle can be frozen and stored up to 3 months.

Peanut brittle has one redeeming quality: peanuts. Outside of that single ingredient, peanut brittle is painfully unhealthy. It contains: sugar, corn syrup, and butter, all of which are unhealthy for your body in different ways.

Why is my peanut brittle bitter? ›

I don't recommend substituting honey, molasses, or agave for the corn syrup. Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

As the sugar is cooking and begins turning amber in color it accumulates small amounts of acid, and that acid reacts chemically with the alkaline baking soda releasing about a zillion minuscule bubbles of CO₂ that get trapped, making the sugar porous and, well… brittle.

If your butter was too soft or if the peanut butter you're using is too thin, the filling can get a little soft and sticky as you're rolling. The refrigerator can fix that—stop what you're doing and chill the bowl of filling for 15 minutes in the refrigerator before trying again to roll into balls.

Thoroughly rinse the raw unshelled peanuts in water. Put the water, salt, seasoning, peanuts in a large stockpot, bring to a boil: Cover and reduce the heat just enough to maintain a low boil. Boil for 2 to 3 hours or longer (some boil their peanuts all day), until peanuts reach desired level of softness.

When using peanut butter only, the key is heat. Peanut butter is naturally high in fat, but that fat is nearly solid at room temperature. In order to soften it up, you need some heat. In my case, I heated two tablespoons in a heat-proof bowl and then stirred like crazy.